Technical Data Sheets (TDS) and Safety Data Sheets (SDS)
Download the Technical Data Sheets and Safety Data Sheets for the products supplied by Atabaş Global: bitumen and polymer modified bitumen, ferroalloys, aromatic solvents, sulphur, barite and agricultural products. The TDS gives the specification and applications of each grade; the SDS gives safe handling in the 16-section GHS format. All 53 documents are free PDF downloads with no registration.
- 27Products
- 27Technical Data Sheets
- 26Safety Data Sheets
- Last updated
Bitumen and Polymer Modified Bitumen
Penetration-grade paving and hard-grade bitumen and SBS polymer modified bitumen for road construction, airfields and waterproofing.
Bitumen 60/70
Pen 60/70Penetration-grade paving bitumen, manufactured and supplied to ASTM D946 / AASHTO M20.
- Grade
- Penetration 60/70
- Standard
- ASTM D946 / AASHTO M20
- CAS No.
- 8052-42-4
- Main applications
- Hot-mix asphalt for road, highway and airport pavements
- Surface dressing and chip-seal applications
- Feedstock for polymer modified and cutback bitumen
Bitumen 80/100
Pen 80/100Medium-soft paving grade bitumen for temperate and cool climates, conforming to the ASTM D946/D946M and AASHTO M20 specification family.
- Grade
- Penetration 80/100
- Standard
- ASTM D946/D946M / AASHTO M20
- CAS No.
- 8052-42-4
- Main applications
- Hot-mix asphalt binder for base, binder and wearing courses in temperate and cold climates
- Feedstock for bitumen emulsions, cutbacks and polymer modified bitumen
- Waterproofing compounds, roofing felts and mastic asphalt
Bitumen 20/30
Pen 20/30Hard-grade paving and industrial bitumen manufactured in accordance with EN 12591, for applications that need high stiffness and resistance to deformation.
- Grade
- Penetration 20/30
- Standard
- EN 12591
- CAS No.
- 8052-42-4
- Main applications
- Feedstock for oxidised (blown) and industrial bitumen grades
- Polymer modified bitumen where a low base penetration is required
- Heavy-duty pavements and airport aprons in hot climates; mastic and joint sealants
Polymer Modified Bitumen (PMB)
PMBSBS elastomer-modified bitumen to EN 14023 for heavy traffic, high temperatures and long-life pavements.
- Grades
- PMB 25/55-65
- PMB 45/80-65
- PMB 45/80-55
- Standard
- EN 14023, TS EN 14023, KGM specification
- Polymer content
- 3 to 7% SBS by weight
- Main applications
- Motorways, airport runways, stone mastic asphalt and bridge deck waterproofing
- Urban arterial roads, porous and noise-reducing surface courses
- General highway surfacing, binder courses and maintenance overlays
Ferroalloys: Manganese
Silicomanganese and ferro manganese for deoxidation and manganese alloying in carbon, long and flat steel production.
Silicomanganese
SiMnManganese–silicon–iron alloy produced by carbothermic reduction in submerged arc furnaces; supplied as crushed and screened lumps.
- Grades
- SiMn 60/14
- SiMn 65/16
- SiMn 68/18
- HS code
- 7202.30 (indicative)
- Prepared with reference to
- ISO 5447, ASTM A483/A483M, GB/T 4008
- Main applications
- Combined deoxidation and manganese–silicon alloying in carbon and long steel production (rebar, wire rod, sections) in EAF and BOF routes
- Raw material for the production of medium and low carbon ferro manganese
- Foundry and cast iron applications
High Carbon Ferro Manganese
HC FeMnCarbon-saturated manganese–iron alloy produced in submerged arc furnaces; supplied as crushed and screened lumps.
- Grades
- HC FeMn 65
- HC FeMn 70
- HC FeMn 75
- HS code
- 7202.11 (indicative)
- Prepared with reference to
- ISO 5446, ASTM A99, GB/T 3795
- Main applications
- Manganese addition and deoxidation in carbon and low-alloy steels
- Foundry and cast iron applications
- Manganese units in high-manganese and wear-resistant steels
Medium & Low Carbon Ferro Manganese
MC / LC FeMnRefined manganese–iron alloys with reduced carbon content, produced by silicothermic refining; supplied as crushed and screened lumps.
- Grades
- MC FeMn 80
- LC FeMn 80
- HS code
- 7202.19 (indicative)
- Prepared with reference to
- ISO 5446, ASTM A99, GB/T 3795
- Main applications
- Manganese addition where low carbon is required: flat products and deep-drawing steels
- Low-carbon and 200-series stainless steels
- Welding electrodes and fluxes
Ferroalloys: Chromium
High, medium and low carbon ferro chrome supplying chromium units for stainless, alloy and tool steels.
High Carbon Ferro Chrome
HC FeCrChromium–iron alloy produced by carbothermic reduction of chromite in submerged arc furnaces, including charge-chrome grade; supplied as crushed and screened lumps.
- Grades
- HC FeCr 60
- HC FeCr 65
- Charge Chrome 50/55
- HS code
- 7202.41 (indicative)
- Prepared with reference to
- ISO 5448, ASTM A101, GB/T 5683
- Main applications
- Chromium units for 300- and 400-series stainless steels
- Alloy, bearing and tool steels
- Chromium-bearing cast irons
Low & Medium Carbon Ferro Chrome
LC / MC FeCrRefined chromium–iron alloys with reduced carbon content, produced by silicothermic or converter refining; supplied as crushed and screened lumps.
- Grades
- LC FeCr C0.15
- LC FeCr C0.10
- ELC FeCr C0.05
- MC FeCr C2.0
- HS code
- 7202.49 (indicative)
- Prepared with reference to
- ISO 5448, ASTM A101, GB/T 5683
- Main applications
- Final chromium trim where low carbon is required
- Low-carbon stainless and heat-resistant steels
- Welding electrodes and special alloys
Ferroalloys: Silicon, Inoculants and Nodularisers
Ferro silicon, magnesium and zirconium-bearing alloys and calcium silicon for steelmaking and cast iron foundries.
Ferro Silicon
FeSiSilicon–iron alloy produced by carbothermic reduction of quartz in submerged arc furnaces; supplied as crushed and screened lumps.
- Grades
- FeSi 70
- FeSi 75
- FeSi 45
- HS code
- 7202.21, 7202.29 (indicative)
- Prepared with reference to
- ISO 5445, ASTM A100, GB/T 2272
- Main applications
- Deoxidation and silicon alloying in steelmaking
- Electrical (silicon) steels and spring steels
- Base alloy for inoculants and nodularisers in cast iron foundries
Ferro Silicon Magnesium
FeSiMgMagnesium-bearing ferrosilicon nodulariser with calcium and rare earth additions, produced by ladle alloying; supplied as crushed and screened granules.
- Grades
- FeSiMg 6
- FeSiMg 8
- HS code
- 7202.99 (indicative)
- Prepared with reference to
- International industry nodulariser grades
- Main applications
- Nodularising treatment for ductile (SG) iron
- Compacted graphite iron production
Ferro Silicon Zirconium
FeSiZrZirconium-bearing ferrosilicon alloy produced in submerged arc furnaces; supplied as crushed and screened granules.
- Grades
- FeSiZr 20
- HS code
- 7202.99 (indicative)
- Prepared with reference to
- International industry inoculant grades
- Main applications
- Inoculation of grey and ductile cast iron
- Deoxidation and nitrogen fixing in steel
- Grain refinement
Calcium Silicon
CaSiCalcium–silicon alloy produced by carbothermic reduction in submerged arc furnaces; supplied as lumps or as powder for cored-wire production.
- Grades
- CaSi 30/60 (lump)
- CaSi 30/60 (powder)
- HS code
- 7202.99 (indicative)
- Prepared with reference to
- ASTM A495, YB/T 5051
- Main applications
- Deoxidation and desulphurisation of steel
- Calcium treatment for inclusion modification
- Cored-wire filling
Ferroalloys: Special and Noble
Molybdenum, vanadium, tungsten, niobium, titanium and boron alloys for microalloyed, tool, stainless and special steels.
Ferro Molybdenum
FeMoMolybdenum–iron alloy produced by metallothermic reduction of roasted molybdenite concentrate; supplied as crushed and screened lumps.
- Grades
- FeMo 60
- FeMo 70
- HS code
- 7202.70 (indicative)
- Prepared with reference to
- ISO 5452, ASTM A132, GB/T 3649
- Main applications
- Molybdenum alloying in HSLA, tool and high-speed steels
- Stainless steels (e.g. 316) and heat-resistant steels
- Alloyed cast irons
Ferro Vanadium
FeVVanadium–iron alloy produced by aluminothermic or electro-silicothermic reduction of vanadium oxides; supplied as crushed and screened lumps.
- Grades
- FeV 50
- FeV 80
- HS code
- 7202.92 (indicative)
- Prepared with reference to
- ISO 5451, ASTM A102, GB/T 4139
- Main applications
- Microalloying of HSLA steels and high-strength rebar
- Tool and high-speed steels
- Special alloys
Ferro Tungsten
FeWTungsten–iron alloy produced by electro-carbothermic or silicothermic reduction of tungsten concentrates; supplied as crushed and screened lumps.
- Grades
- FeW 80
- HS code
- 7202.80 (indicative)
- Prepared with reference to
- ISO 5450, ASTM A144, GB/T 3648
- Main applications
- High-speed tool steels
- Heat-resistant alloys
- Hardfacing and welding consumables
Ferro Niobium
FeNbNiobium–iron alloy produced by aluminothermic reduction of niobium oxide (pyrochlore-derived); supplied as crushed and screened lumps.
- Grades
- FeNb 65
- HS code
- 7202.93 (indicative)
- Prepared with reference to
- ISO 5453, ASTM A550, GB/T 7737
- Main applications
- Microalloying of HSLA steels for pipeline, automotive and structural use
- Stabilisation of stainless steels
- Special and heat-resistant alloys
Ferro Titanium
FeTiTitanium–iron alloy produced by aluminothermic reduction (FeTi 30) or by induction melting of titanium and steel (FeTi 70); supplied as crushed and screened lumps.
- Grades
- FeTi 30
- FeTi 70
- HS code
- 7202.91 (indicative)
- Prepared with reference to
- ISO 5454, ASTM A324, GB/T 3282
- Main applications
- Deoxidation and nitrogen fixing in steelmaking
- Stabilisation of stainless steels (e.g. 321)
- Interstitial-free steels and welding consumables
Ferro Boron
FeBBoron–iron alloy produced by carbothermic or aluminothermic reduction of boric oxide; supplied as crushed and screened lumps.
- Grades
- FeB 18
- FeB 20
- HS code
- 7202.99 (indicative)
- Prepared with reference to
- GB/T 5682, international industry grades
- Main applications
- Hardenability addition in boron steels
- Magnetic and amorphous alloys
- Welding consumables
Aromatic Solvents
High-purity aromatic solvents for paints, coatings, printing inks, adhesives and chemical production.
Toluene
C7H8High-purity commercial toluene (methylbenzene), a clear, colourless aromatic solvent recovered by extractive distillation.
- CAS No.
- 108-88-3
- HS code
- 2902.30
- Test basis
- ASTM methods
- Main applications
- Solvent in paints, coatings, printing inks, lacquers, adhesives and cleaners
- Chemical feedstock for benzene, xylenes, TDI, benzoic acid and caprolactam
- Process and extraction solvent in pharmaceutical and agrochemical industries
Xylene 5° (Mixed Xylenes)
Xylene 5°Solvent-grade mixed xylenes distilling within a 5 °C range, clear, colourless and of high aromatic purity.
- CAS No.
- 1330-20-7
- HS code
- 2902.44
- Distillation range
- 5.0 °C max (ASTM D850)
- Main applications
- Solvent and diluent in paints, varnishes, printing inks, adhesives and agrochemicals
- Feedstock for para-, ortho- and meta-xylene separation
- Process solvent in pharmaceutical, leather and printing industries
Solvent Naphtha 100 (Light Aromatic)
SN 100C9 light aromatic hydrocarbon solvent with a medium-fast evaporation rate for industrial and coatings use.
- CAS No.
- 64742-95-6
- Flash point
- 38 °C min (closed cup)
- Aromatic content
- 99% min
- Main applications
- Diluent and thinner for fast-drying alkyd and oil-based paints, varnishes and lacquers
- Carrier solvent in printing inks and adhesives
- Rubber processing and polymer solvent applications
Solvent Naphtha 150 (Heavy Aromatic)
SN 150C10–C11 heavy aromatic hydrocarbon solvent with a slow evaporation rate for high-solids coatings and industrial use.
- CAS No.
- 64742-94-5
- Flash point
- 60 °C min (closed cup)
- Aromatic content
- 99% min
- Main applications
- Diluent and thinner for slow-drying, high-solids alkyd and oil-based paints
- Carrier solvent in printing inks and adhesives
- Rubber processing and polymer solvent applications
Sulphur and Industrial Minerals
Granular sulphur for sulphuric acid and fertilizer production, and API-grade barite for drilling fluids.
Granular Sulphur
Elemental sulphurBright yellow elemental sulphur, formed into dry, free-flowing granules, of high purity and low ash, acidity and moisture.
- Purity
- 99.8% min (dry basis)
- CAS / EC No.
- 7704-34-9 / 231-722-6
- Grade
- Industrial / fertilizer grade
- Main applications
- Sulphuric acid manufacture (contact process)
- Phosphate fertilizers (DAP, MAP, TSP, SSP) and ammonium sulphate
- Soil sulphur and wide-ranging industrial uses
Barite (Barium Sulfate)
BaSO4Drilling-fluid grade barite of Turkish origin, manufactured and tested to API Spec 13A / ISO 13500.
- Grade
- Drilling-fluid grade, API Spec 13A / ISO 13500
- CAS / EC No.
- 13462-86-7 / 236-664-5
- HS code
- 2511.10
- Main applications
- Weighting agent for oil and gas well drilling fluids
- Raw material for paints, paper coatings, linoleum, textiles and rubber
Agricultural Products
Food-grade whole grain millet for milling, food processing, bird feed and animal feed.
Red Millet (Whole Grain)
Proso milletSmall-seeded, naturally gluten-free proso millet with reddish-brown to orange-red kernels, cleaned and graded at origin.
- Crop
- 2026
- HS code
- 1008.29
- Purity
- 98.0% min
- Main applications
- Human consumption, milling and food processing
- Bird feed
- Animal feed
Yellow Millet (Whole Grain)
Proso milletSmall-seeded, naturally gluten-free proso millet with bright yellow kernels, cleaned and graded at origin.
- Crop
- 2026
- HS code
- 1008.29
- Purity
- 98.0% min
- Main applications
- Human consumption, milling and food processing
- Bird feed
- Animal feed
No documents match your search. Try a product or grade such as “ferro chrome” or “SiMn”, or write to [email protected].
How to use these documents
TDS: choose the grade
Chemical specification, sizing, applications, packing and storage for each grade, prepared with reference to ISO, ASTM and GB/T standards.
SDS: handle it safely
Hazards, safe handling, storage, transport and emergency measures in the 16-section GHS format. Share it with your warehouse, melt shop and HSE teams.
Each shipment: contract and CoQ
Origin, quantity, packing and guaranteed values for every cargo are set by the Sales Contract and the Certificate of Quality issued at loading.
Frequently asked questions
What is a Technical Data Sheet (TDS)?
A Technical Data Sheet gives the chemical specification, sizing, applications, packing and storage of each product grade. Use it to choose the right grade before you request an offer.
What is a Safety Data Sheet (SDS or MSDS)?
A Safety Data Sheet sets out the hazards of a product and how to handle, store, transport and dispose of it safely, with first-aid and fire-fighting measures. SDS and MSDS mean the same document; SDS is the current GHS term.
Are the documents free to download?
Yes. All Technical Data Sheets and Safety Data Sheets on this page are free PDF downloads. No registration is required.
Which regulations are the Safety Data Sheets prepared with reference to?
Atabaş Global Safety Data Sheets follow the 16-section format of the UN Globally Harmonized System (GHS) and are prepared with reference to Regulation (EC) No 1907/2006 Annex II and Regulation (EC) No 1272/2008 (CLP); the exact references are stated on each document. Check the requirements of your own country before use.
Which standards are the specifications based on?
Each Technical Data Sheet names the standards it is prepared with reference to: for example ASTM D946, AASHTO M20, EN 12591 and EN 14023 for bitumen, ISO 5445 to ISO 5454 and the ASTM A99 to A483 series for ferroalloys, ASTM methods for aromatic solvents and API Spec 13A / ISO 13500 for barite.
Does a TDS replace the Certificate of Analysis for a shipment?
No. The TDS gives specification limits for each grade. The guaranteed values, quantity, sizing and packing of every shipment are stated in the Sales Contract and in the Certificate of Quality issued at loading.
How can I check that a document is genuine?
Every document carries an Atabaş Global reference number, for example ATB-TDS-FEALLOY-SIMN-2026-001, and is published on atabas.com.tr. If you receive a copy from a third party, compare it with the version on this page or write to [email protected].
Does Atabaş Global supply sanctioned countries or companies?
No. Atabaş Global complies with the OFAC, EU, UK and UN sanctions regimes and does not deal with sanctioned countries, companies, individuals or vessels.
How do I request a quotation?
Send the product, grade, quantity, sizing, packing and delivery port to [email protected] or call +90 212 801 64 60. We reply with an offer and the latest Certificate of Analysis.
Need an offer or a Certificate of Analysis?
Send the product, grade, quantity, sizing, packing and delivery port. We reply with an offer and the latest CoA.
Page last updated: